What is the difference between hydraulic press and hydraulic press?
The hydraulic press can be driven by both oil and water, because water is also a liquid. There is also an oil-gas mixture called an air compressor or an air-oil press or a pressurized press. What about the role and principle between their components? Also briefly. The working mode and development course of each component of hydraulic press: hydraulic transmission is a transmission mode that uses liquid pressure to transfer power and control. Hydraulic device is composed of hydraulic pump, hydraulic cylinder (hydraulic motor and other actuators), hydraulic control valve and hydraulic auxiliary element hydraulic pump: the conversion device of mechanical energy into hydraulic energy. Hydraulic cylinder (hydraulic motor and other actuators): hydraulic energy into mechanical energy. Control valve: control hydraulic oil flow, pressure, hydraulic actuator working order and protection of hydraulic circuit. The popular point is to control and adjust the flow, pressure and flow of hydraulic media. Thus controlling the direction of motion of the actuator, the output force or torque. Speed of movement. Action sequence, as well as limiting and regulating the working pressure of hydraulic system, preventing overload and other functions (such as one-way valve, reversing valve, relief valve, pressure reducing valve, sequence valve, throttle valve), etc. Speed regulating valve, etc).